Article

Tarrant Regional Water District utilizes Assess & Address® approach to manage pipeline network

Tarrant Regional Water District (TRWD) and Pure Technologies U.S. (Pure) have a long history of working together to keep the water transmission mains in the Dallas-Fort Worth (DFW) area in good operating condition.

The partnership began 17 years ago with mutual development of electromagnetic technology to inspect prestressed concrete cylinder pipe (PCCP). One of Pure’s first electromagnetic inspection prototypes was developed (with funding assistance from American Water Works Research Foundation [now Water Research Foundation (WRF)], commercialized (with assistance from TRWD) and first pulled through TRWD’s pipeline on a little red wagon!

Inspection Prototype

TRWD is one of the largest raw water suppliers in DFW with large-diameter pipelines that transport water from the East Texas Cedar Creek and Richland-Chambers Reservoirs. TRWD provides water to almost two million people and spans an 11-county area in North Texas.

Electromagnetic Inspector

Electromagnetic technology platforms recognized around the world

Since 1999, TRWD has utilized Pure’s advanced inspection and condition assessment services to evaluate than 240 miles of PCCP. Over the years, TRWD has deployed a variety of inspection platforms to determine the condition of their critical supply lines. This includes PipeDiver®, a free-swimming electromagnetic inspection technology, Sahara®, an acoustic leak and gas pocket detection tool, and a manned electromagnetic tool equipped with PureEM® to collect full circumferential data of the pipe wall.

The condition assessment data is compiled with a Geographic Information System (GIS) deliverable, which provides TRWD with detailed information that is used to implement a targeted pipeline repair and replacement strategy.

TRWD utilizes Pure Technologies’ cost-effective Assess and Address® approach to target specific pipes for repair or replacement that are near the end of their service life, as opposed to replacing entire sections of pipe in good condition. In addition, this proactive approach allows TRWD to document significant savings over a complete pipeline replacement strategy.

Since 2000, a total of 271 pipes have been replaced during planned maintenance based on the results from Pure inspections.  As a result, TRWD has noticed a dramatic decline in failures since the late 90s doing a risk-based prioritization and replacement/rehab program, in addition to implementing cathodic protection, pressure transient surge reduction measures, and pipeline protection measures from external loads.

TRWD is extremely proactive when it comes to understanding their pipeline infrastructure. They take pride in their ability to locate and repair leaks, and repair or replace damaged pipes during routine maintenance schedules – rather than in emergency situations.

Tech inspecting a pipe with a tool